LLDP Protokolü Hp Procurve

LLDP Bilgi ve Parametreleri

LLDP durumunu görmek için :

Edge_1# show lldp

Üst düzey bilgi almak için :

Edge_1# show lldp info remote-device

LLDP Remote Devices Information

LocalPort | ChassisId                    PortId  PortDescr      SysName

——— + ————————- —— ——— ————-

1                 | 00 04 ea 5d bd 00         53             B1        Group01

LLDP operasyon parametreleri :

Edge_1# lldp ?

admin-status             Set the port in one of the operational mode transmit | receive | transmit & receive | disable the port.

config                          Specify configurational parameters to the port.

enable-notification   Set the port for which notification should be enabled.

fast-start-count         Set MED fast-start count in seconds.

holdtime-multiplier   Set holdtime-multiplier between <2-10>; the default is 4.

refresh-interval           Set refresh interval/transmit-interval in seconds.

run                                 Start or Stop LLDP on device.

top-change-notify     Set the port for which LLDP MED topology notification  should be enabled

About cemerbas

Check Also

IRF Konfigürasyonu Hp Procurve

[Sysname]irf member 1 renumber 1Warning: Renumbering the switch number may result in configuration change or …

Bir yanıt yazın